|
Post by forthehorde on Oct 20, 2017 20:12:57 GMT
I recently bought the loki sculpt. Love the way he looks but the actual quality I received was below par. I'm used to burs being on my models. But they're usually small and easily cut off. These ones are huge and everywhere. Is this a miscast, or is this just the standard quality of models now? I've noticed some hefty chunks on my imperatus as well but they weren't nearly this bad. ibb.co/kYMii6ibb.co/nv3UO6ibb.co/fD8kwR
|
|
|
Post by HubertJFarnsworth on Oct 20, 2017 20:19:19 GMT
Personal preference obviously but that doesn't look too bad to me. Either way, based on the Lost Hemisphere breakdown yours looks normal to me. losthemisphere.com/wp/2017/02/loki/
|
|
|
Post by forthehorde on Oct 20, 2017 21:00:10 GMT
That sucks. That's a fair amount of extra work sawing those down and fileing them clean. Fun for a modeler but crappy for anyone who just wants to assemble and play. At a $60+ cad price tag you'd think they'd at least clean up the models. This game isn't cheap to play. Is this comparable to other miniature table top games?
|
|
|
Post by Big Fat Troll on Oct 20, 2017 21:13:25 GMT
Okay, no sweat. I've bought a few models in this new material and one of the reasons why I love it is that it comes with free basing material. Here's what you do: Simply grab the burr with a pair of needle-nose pliers and gently twist it off! You will be surprised at how easily and cleanly it comes off. Just file or whittle the remnant off of the piece. Save the burrs! You can put them on bases and paint them to look like rocks or rubble. Zoom Out Zoom in Front Zoom In Back
|
|
|
Post by chillychinaman on Oct 20, 2017 21:14:02 GMT
Same thing happened when I picked up Azrael and/or Eye of Truth. Maybe it's just been the recent or resin stuff? I don't recall my other heavy jack/beasts being like this.
|
|
|
Post by forthehorde on Oct 20, 2017 21:28:44 GMT
Hmmm the pliers sound like a good idea. Better than sawing through it with a modeling knife like I was planning on. Kind of worried about the shield or tail cracking though. That basing looks awesome though!
And yeah it must be the newer stuff. None of my warpolfs or jacks were like this. Not even the white plastic starter box stuff.
|
|
|
Post by GumbaFish on Oct 20, 2017 23:16:45 GMT
Loki is made out of resin though, and is therefore made from a different material then the rest of those things. This does seem strange though, because I have had other larger resin models from them like Kromac 2 that I recall being very minimal cleanup.
|
|
faelin
Junior Strategist
Posts: 121
|
Post by faelin on Oct 20, 2017 23:23:23 GMT
I use fingernail clippers to cut them off, then a file to clean up the last little bump. Most burrs will fit nicely in the mouth of an adult sized clipper.
|
|
spideredd
Junior Strategist
Summer Gamer
Posts: 588
|
Post by spideredd on Oct 20, 2017 23:36:25 GMT
I use fingernail clippers to cut them off, then a file to clean up the last little bump. Most burrs will fit nicely in the mouth of an adult sized clipper. Or tin-snips. Or wire cutters. Any device that allows you to easily cut things (except scissors. They'll do it, but it's never pretty) I prefer to use a small saw (It might be small, but it has cut through titanium and steel), but I realise that isn't for everyone. You get resin everywhere and it can be difficult to cut it straight.
|
|
|
Post by Cryptix on Oct 21, 2017 0:18:14 GMT
I use fingernail clippers to cut them off, then a file to clean up the last little bump. Most burrs will fit nicely in the mouth of an adult sized clipper. Or tin-snips. Or wire cutters. Any device that allows you to easily cut things (except scissors. They'll do it, but it's never pretty) I prefer to use a small saw (It might be small, but it has cut through titanium and steel), but I realise that isn't for everyone. You get resin everywhere and it can be difficult to cut it straight. I remember trying to cut GW sprues with scissors back when I was young in 4th edition.
|
|
|
Post by macdaddy on Oct 21, 2017 0:33:22 GMT
Cryptix I too remember those days...boy was that rough
|
|
|
Post by gobber on Oct 21, 2017 2:25:53 GMT
Yeah I use wire cutters; it cracks pretty cleanly off with just a bit of force. Heh, scissors are still one of my favorite tools for filing the last bit down (pushing a single blade with my thumb as opposed to trying to cut; ew)
|
|
|
Post by nyarlathotep333 on Oct 21, 2017 4:39:40 GMT
I have a few different brands of hobby clippers that work super well for cutting bits like this off models If you do a Google search for hobby clipers you'll get a bunch of results...in fact Privateer Press even has a brand name clipper that shows up in the search. I find they work a lot easier (and usually with less chance of damage) than pliers or other types of cutting implements. I've not regretted buying them at all. I noticed myself that these large bits of flashing are really only present on the newer resin stuff that I've bought. The hard plastic seems to not have this issue based on my experiences. It is somewhat annoying as these bits are not trivial to cut through...they tend to be pretty thick.
|
|
faelin
Junior Strategist
Posts: 121
|
Post by faelin on Oct 21, 2017 15:36:21 GMT
Tin snips? Wire cutters? I wasn't that rich when I started. All of the stuff I used was scavenged from around the house. We cut our nails more then we cut through wire. Thus nail clippers.
|
|