|
Post by Ecalsneerg on Sept 20, 2017 11:42:21 GMT
I've finally got around to finishing my starter box, and have left Kryssa until last, but I'm finding it very uncertain where exactly the cloak/left arm is meant to line up.
From having looked at various sources, I figure there absolutely is going to be a gap, but I'm not sure where exactly it's meant to line up and how big the gap's going to end up being. I'd rather minimize it because I'm not the best sculptor in the world and I'd prefer to keep texturing any putty to a bare minimum.
|
|
|
Post by ForEver_Blight on Sept 21, 2017 19:37:50 GMT
Green stuff / air dry clay / bondo
I can't remember exactly the order of in which i did things, but I know I had to use a bit of clay to fill the gap and tried to texture it to not look completely terrible. I would suggest making sure the arm is connected in a way that you are happy with. I think it's easier to fill in for the cape than the arm.
|
|
|
Post by nyarlathotep333 on Sept 22, 2017 0:51:22 GMT
I am in the process of painting her right now. Initially I used a small bit of greenstuff on her arm/cloak as well but I wound up removing the arm again as I worked on her so I could paint under that area a bit easier. I am almost ready to glue it back on.
I had issues with the mold lines as well which were sort of frustrating at first but I am happy with how she is turning out so far.
|
|