Post by Aries on Mar 17, 2017 8:08:15 GMT
Many Minion player converts his Totem Hunter, and they usually find very creative ways to do that, so if you have a groovy conversion of your own, or just saw something on the net that can rev up the creativity of others, then feel free to post it here.
I'll start it with mine. I've made this when I started collecting Blindwater stuff. It doesn't take much to convert the TH into a Predator, just drill some small holes into it's head with a 0.8mm drill bit, (not too deep) shape some long cones from GS (make them thinner than the holes you've made), push them into the holes, let them dry for about 30 minutes, then gently bend them to their place.
As for the mandibles, they're made from GS too, and I don't want to lie, it was a pretty difficult job and I had to start again a few times, so gather some patience before you start working on something like this. The good news is that it wasn't necessary to cut anything from the dude's face, so I just attached 2 protruding small cylinders to each side of his face, connected said cylinders with a thin layer of GS, let them dry for a bit, then pushed a tiny hole into each of them to make space for the fangs. Form small cones for the fangs, and gently pushed them into their spaces while swearing continously.
Oh yeah, the dude in his hand is just some random GW zombie bit. I haven't finished the painting completely, but most of the work is done.
I'll start it with mine. I've made this when I started collecting Blindwater stuff. It doesn't take much to convert the TH into a Predator, just drill some small holes into it's head with a 0.8mm drill bit, (not too deep) shape some long cones from GS (make them thinner than the holes you've made), push them into the holes, let them dry for about 30 minutes, then gently bend them to their place.
As for the mandibles, they're made from GS too, and I don't want to lie, it was a pretty difficult job and I had to start again a few times, so gather some patience before you start working on something like this. The good news is that it wasn't necessary to cut anything from the dude's face, so I just attached 2 protruding small cylinders to each side of his face, connected said cylinders with a thin layer of GS, let them dry for a bit, then pushed a tiny hole into each of them to make space for the fangs. Form small cones for the fangs, and gently pushed them into their spaces while swearing continously.
Oh yeah, the dude in his hand is just some random GW zombie bit. I haven't finished the painting completely, but most of the work is done.
